This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.

Visaton Starlet - price per pair.

Visaton Starlet - price per pair.
Visaton Starlet - price per pair. Visaton Starlet - price per pair. Visaton Starlet - price per pair.
Product Code: Visaton Starlet - price per pair.
Reward Points: 0
Availability: In Stock
Price: £428.57
Ex Tax: £357.14

Call us on 01270 883243 to order

free delivery

The Starlet uses very good quality drive units to achieve a well balanced and realistic sound from and attractive sized cabinet.Characteristics and sound properties

The STARLET is a 3-way speaker which is extremely good value for money. The individual drivers used here have all proved their worth in numerous well-known constructions. At the bottom end of the frequency range, there is the W 200 S 8 Ohm from the EXPERIENCE V 20, mounted in a 58 litre vented cabinet. The mid- to high-range is covered by the W 100 S 8 Ohm and DT 94 8 Ohm from the ALTO series of speakers. The impression given by the STARLET is of a solid low-frequency foundation with powerful, crisp bass. The mid-range has a pleasant, unobtrusive sound, and at the higher frequency ranges the STARLET produces sparkling, clear-cut treble. In a nutshell, the STARLET is an extremely reasonably priced column speaker with a well-rounded tonal character and good power handling capabilities.


Protective grille: NG 8" for W 200 S 1 piece NG 4 for W 100 S 1 piece

Extract from Mega

"The Starlet sounds … crisp, pleasant and well-rounded, … but with a solid bass foundation that ensures sufficient power and depth but without becoming overpowering. The mid- and high-ranges were well distinguished, clearly defined, devoid of all aggression and crisply reproduced."

Sound properties and value for money: very good

Additional Technical Data:

Cut-off frequency 500 / 5000 Hz
Principle of Housing Bassreflex
Net volume 58 l
Outer dimension height 1000 mm
Outer dimension width 270 mm
Outer dimension depth 300 mm


The construction of the STARLET has been designed to provide a good starting point for even the least experienced craftsman since all the boards are straight sides and just glued together. The cover for the mid-range (AK 10.13) has to be fitted from behind over the cut-out in the baffle for the mid-range, before the baffle is glued in (remember the cables!) The crossover unit is attached to the rear panel behind the cut-out in the baffle for the bass speakers.

Inner damping

The damping material is evenly distributed throughout the entire cabinet. But leave the area directly behind the bass tube free. About 1/4 of a mat of damping material is loosely pushed into the cover before the mid-range drivers are fitted.

Component parts list for 1 box

The kit includes all necessary components (see list below). Cabinet parts are not included.

Tweeter: DT 94 8 Ohm 1 piece
Midrange driver: W 100 S 8 Ohm 1 piece
Woofer: W 200 S 8 Ohm 1 piece
Crossover: "Starlet"
Cover cap: AK 10.13 1 piece
Bass reflex tube: BR 15.34 (length 8 cm) 1 piece
Terminal: ST 77 1 piece
Damping material: 3 bags
Wood screws: 4 x 20 mm 4 pieces 3,5 x 19 mm 3 pieces
Countersunk screws: 3,5 x 25 mm 14 pieces
Cable: 2 x 1,5 mm2 3,5 m

Cabinet parts list for 1 box

Parts Size (mm) Quantity
Material: 19 mm chipboard or MDF
Top and bottom panel 262 x 232 2
Side panel 262 x 1000 2
Front and rear panel 1000 x 270 2
Brace 232 x 80 1
Brace 262 x 80 1


Rated Power 100 W
Maximum power 150 W
Impedance 8 Ohm
Sound pressure level -
Sensitivity -
Frequency response (-10 dB) 30 - 22000 Hz
Mean sound pressure level 86 dB(1 W/1 m)
Max sound pressure level -
Maximum cone displacement -
Resonance frequency -
Magnetic induction -
Magnetic flux -
Height of front pole-plate -
Voice coil diameter -
Height of winding -
Cutout diameter -
Length of cable -
Net Weight -