The ALTO LINE is a slim, 2-band column speaker with two 13 cm mid-bass units and one dome tweeter.Characteristics and sound properties
The ALTO LINE is a slim, 2-band column speaker with two 13 cm mid-bass units and one dome tweeter. Due to its slim design and the correspondingly small footprint, this model is ideal as a free-standing speaker in smaller rooms. The spatial separation is well handled by the speakers and can, as a result, produce clear sound characteristics even in "normal" living rooms. The unusually broad range bass spectrum for a speaker of this size, that remains crisp even at higher output levels, is a point worthy of note. As a result of its balanced, crisp sound characteristics, and the finely detailed, exuberant high-frequency output, the ALTO LINE can be considered a fully-fledged member of the ALTO speaker family.
Protective grille: NG 5" for W 130 S 2 pieces
ALTO GENESIS SAT ALTO GENESIS SUB
ALTO I ALTO II
ALTO III C EXPERIENCE V 20
Simply glue the boards together (butt-jointed) as shown in the parts list. After that, cut out the openings for the speaker drivers, the bass reflex tube (front) and the terminal connections (rear).
The damping of the cabinet uses three mats of damping material rolled loosely, pushed into the cabinet through a bass opening and arranged uniformly above the bass tube.
The kit includes all necessary components (see list below). Cabinet parts are not included.
Tweeter: DT 94 8 Ohm 1 piece
Bass-midrange driver: W 130 S 8 Ohm 2 pieces
Crossover: "Alto Line"
Bass reflex tube: BR 15.34 (length: 14,7 cm) 1 piece
Terminal: ST 77 1 piece
Damping material: 1,5 bags
Wood screws: 3,5 x 19 mm 3 pieces
Countersunk screws: 3,5 x 25 mm 14 pieces
Cable: 2 x 1,5 mm2 2 m ................
Cabinet parts list for 1 box
Parts Size (mm) Quantity
Material: 19 mm chipboard or MDF
Front and rear panel 862 x 152 2
Side panel 900 x 270 2
Top and bottom panel 270 x 152 2
|Rated Power||80 Watt|
|Maximum power||130 Watt|
|Sound pressure level||-|
|Frequency response (-10 dB)||33 - 22000 Hz|
|Mean sound pressure level||-|
|Max sound pressure level||-|
|Maximum cone displacement||-|
|Height of front pole-plate||-|
|Voice coil diameter||-|
|Height of winding||-|
|Length of cable||-|