This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.

Visaton Couplet light - price per pair.

Visaton Couplet light - price per pair.
Visaton Couplet light - price per pair. Visaton Couplet light - price per pair. Visaton Couplet light - price per pair.
Product Code: Visaton Couplet light - price per pair.
Reward Points: 0
Availability: In Stock
Price: £393.74
Ex Tax: £328.12

Call us on 01270 883243 to order

free delivery

The COUPLET LIGHT is a compact D Appolito configuration shelf speaker.Characteristics and sound properties

The COUPLET LIGHT is a compact D Appolito configuration shelf speaker. It can be used as a shelf-top speaker or mounted on free-standing supports. In contrast to the original COUPLET, this system uses two W 130 S 8 OHM as woofers. The tweeter and the cabinet design with its flow-optimised BR 25.50 bass reflex tube have been taken over unchanged.

The result is a speaker that maintains its linear characteristics right across the frequency range. Due to the well balanced medium range, the fine details of music reproduction, in particular, comes across particularly clearly. The excellent omnidirectional sound distribution creates a particularly room-filling music reproduction and clear location of each individual instrument or voice. The lowest-range bass comes across equally powerfully. In short, the COUPLET LIGHT is a speaker that is really good fun.


Protective grille: NG 5" for W 130 S 2 pieces

Similar products



All the cabinet panels are cut from 19 mm chipboard or medium density fibreboard, butt-jointed and glued. The chamfers on the baffle can be applied with a power jig or circular saw set to 45° or applied later using an orbital sander.

Next, cut out the openings for the drivers, the bass reflex tube and the terminals.

Due to the small size of the cut-outs in the baffle, it is difficult to mount the crossover inside the speaker cabinet. It would be possible to make the base removable. However, it is easier to wrap the crossover in damping material and place it through the lower cut-out in the baffle on the floor of the cabinet. When you begin fitting the drivers, start with the bass reflex tube. In order to be able to get the inner trumpet flange through the opening for the upper subwoofer it will be necessary to carefully remove about 5 mm from both sides of the flange.

Inner damping

The damping material is loosely arranged below the bass reflex tube in the cabinet in such a way that the area around the vent remains free.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet. Cabinets and ready-made speaker can be ordered from .

Tweeter: G 20 SC 8 Ohm 1 piece

Woofer: W 130 S 8 Ohm 2 pieces

Crossover: Crossover COUPLET LIGHT

Bass reflex tube: BR 25.50 (full length) 1 piece

Terminal: ST 77 1 piece

Damping material: Polyester wool 1 bag

Wood screws: 3,5 x 19 mm 4 pieces

Countersunk screws: 3,5 x 25 mm 18 pieces

Cable: 2x 1,5 mm2 1,5 m ................

Cabinet parts list for 1 box

Parts Size (mm) Quantity

Material: 19 mm MDF or chipboard

Front, rear panel 460 x 235 2

Side panels 460 x 312 2

Top, bottom panel 197 x 312 2


Rated Power 100 Watt
Maximum power 160 watt
Impedance 4 Ohm
Sound pressure level -
Sensitivity -
Frequency response (-10 dB) 40 - 30000 Hz
Mean sound pressure level 83 dB (1 W/1m)
Max sound pressure level -
Maximum cone displacement -
Resonance frequency -
Magnetic induction -
Magnetic flux -
Height of front pole-plate -
Voice coil diameter -
Height of winding -
Cutout diameter -
Length of cable -
Net Weight -