The ARIA 2 is a small-sized 2-band shelf-top speaker system that uses two TI 100 8 Ohm high-end mid-bass units and the G 20 SC 8 Ohm dome tweeterCharacteristics and sound properties
The ARIA 2 is a small-sized 2-band shelf-top speaker system that uses two TI 100 8 Ohm high-end mid-bass units and the G 20 SC 8 Ohm dome tweeter. The unit is equally well suited to life as a satellite in a straightforward stereo system or for use in a multichannel set-up. It can be combined with larger speakers such as the VOX 200 where it takes over the centre or effect role or a full set of them can be used to cover all channels. The lower limiting frequency is at 75 Hz, i.e. deep-bass should be left to an active subwoofer and the satellites will need protecting with a high-pass section or, in multichannel systems, they should be run in small mode.
If the speakers are positioned right by the wall or in a shelving unit, the bass reflex tube will be partly damped or completely stifled, which can compensate for excessively boosted bass.
ARIA ARIA 2 KE
ARIA DIPOL 1 ARIA KE
The cabinet body uses 16 mm boards. First of all, cut the holes in the boards and apply the bevels. This can be done using an electric jigsaw or hand-held circular saw set to the required angle. Once the cabinet has been completed, apply the milling work for the loudspeaker. Finally, fit the cones.
Since the cabinets are relatively small, it is hardly possible to mount the crossover inside the housing. It can, however, simply be wrapped in damping material and placed inside the speaker if the rear wall is not removable.
The damping material is loosely arranged in the cabinet.
Component parts list for 1 box
The kit includes all necessary components (see list below). Cabinet parts are not included.
Tweeter: G 20 SC 8 Ohm 1 piece
Woofer: TI 100 8 Ohm 2 piece
Crossover: Crossover ARIA 2
Bass reflex tube: BR 6.8 (full length) 2 pieces
Terminal: ST 77 1 piece
Damping material: ½ bag
Wood screws: 3,5 x 19 mm 8 pieces
Countersunk screws: 3,5 x 25 mm 8 pieces
Cable: 2 x 1,5 mm2 1 m ................
Cabinet parts list for 1 box
Parts Size (mm) Quantity
Material: 16 mm chipboard or MDF
Front and rear panel 396 x 160 2
Side panel 396 x 178 2
Top and bottom panel 178 x 128 2
|Rated Power||80 Watt|
|Maximum power||120 Watt|
|Sound pressure level||-|
|Frequency response (-10 dB)||75 - 30000 Hz|
|Mean sound pressure level||86 dB(1 W/1m)|
|Max sound pressure level||-|
|Maximum cone displacement||-|
|Height of front pole-plate||-|
|Voice coil diameter||-|
|Height of winding||-|
|Length of cable||-|